Convert your Home Inverter into Solar Inverter
Convert your Home Inverter into Solar Inverter
| Technical Specification-SOL1224-50A | |
| General | |
| Model | SOL1224-50A |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -10°C to 60°C |
| System Operating Voltage | 12V/24V DC |
| Battery Type | Tubular/SMF |
| Battery Capacity Max. | 200AH |
| Battery Charging Regulation Method | 4 Stage PWM (Bulk/Absorption/Float/Equalize) |
| Max. Solar Power | 12V:800W   24V: 1700W |
| Max. Solar Panel Recommended | 12V, 25A :Â 150W/165W *3 (Parallel) |
| 24V, 25A :Â 250W/315W/325W*3 ( Parallel | |
| 12V, 50A : 150W/165W *5 (Parallel) | |
| 24V, 50A :Â 250W*6 , 315W/325W*5, 390W/400W/425*4 ( Parallel) | |
| Electrical | |
| Nominal Grid Voltage | 230V AC 1Φ |
| Grid Low Cut | 90V + 10V |
| Grid High Cut | 290V + 10V |
| Charging Current (Solar) | 50A/25A |
| Charge Controller Efficiency | 40A/20A |
| Idle Consumption | > 95% |
| Max. Solar input Voltage (Voc) | <20mA |
| 17V-25V ( 12V Batt.) | |
| Min. Solar input voltage (Voc) @ Start-up | 31V-49.5V (24V Batt.) |
| Solar Panel Recovery Voltage | 15V/30V + 2% |
| Max. Solar Current | 17V/34V + 2% |
| Efficiency | >95% |
| Battery Set Points @ 25°C | |
| Bulk Voltage Tubular Battery | 14.6V/29.2V + 2% |
| Absorption Voltage Tubular Battery | 14.2V/28.4V + 2% |
| Float Voltage Tubular Battery | 14V/28V + 2% |
| Bulk Voltage SMF Battery | 13.7V/27.4V + 2% |
| Float Voltage SMF Battery | 13.5V/27.0V + 2% |
| Absorption Duration | 3Hr |
| Equalize Voltage | 14.9V/29.8V + 2% |
| Equalize Duration | 3Hr |
| Equalize calendar | 28 days |
| Mains reconnect when Solar is not present | At any Batt. Voltage |
| Mains reconnect when insufficient Solar Power | Â <Â 11.8V/ 23.6V + 2% |
| Mains disconnect when sufficient Solar Power For Tubular | > 13.8V/27.6V + 2% |
| Mains disconnect when sufficient Solar Power For SMF | 13.7V/27.4V + 2% |
| Display Parameters | |
| 1. Batt. Voltage, Batt. Current, Batt. Type | 1. Battery Reverse Polarity |
| 2. Solar Voltage, Solar Current | 2. Batt. Reverse Current |
| 3. Mode Selection | 3. Over Current of SPV : >56A/28A |
| 4. Solar Status: High, Low, Overload, Overheat | 4. Solar High Voltage |
| 5. Saving- KWh | 5. SPV Reverse Polarity |
| 6. Mains Present, Low, High, Absent | 6. Load Short Circuit through AC Fuse |
| 7. Max. PV Current | 7. Solar Low Voltage |
| 8. Over Temperature | |
| Physical | |
| Ingress Protection | IP-20 |
| Fixing | Wall Mounted |
| Weight (Kg) | 2.33 |
| Dimension (LXWXH) Inch | 9.6X6.9X4.9 |
| * Specification are subject to change without prior notice due to constant improvement in design & technology. | |
Reviews
There are no reviews yet.